Entries by administrator

Material For Plastic prototype

/in , /by

Material For Plastic prototype Making plastic prototype commonly use ABS,PC,PMMA,Nylon,POM and so on.Below is the material performance for reference. ABS is the abbreviation of Acrylonitrile Butadiene Styrene plastic,which unify organically the properties of PB, PAN and PS.Therefore,ABS has good mechanical performance,such as nice impact strength,stable dimension,low water absorption, good corrosion resistance,high mechanical strength and rigidity.ABS […]

Which material is good for making transparent prototypes?

/in /by

Take ordinary two kinds of transparent materials, PC and acrylic as an example.From the point of polishing, the time spent on the PC prototype is relatively long, because its material properties are relatively hard, and some small places cannot be polished with force.Even where it is convenient for people to polish, the time it takes […]

Material For Aluminum Prototype

/in /by

Material For Aluminum Prototype 1.Pure aluminum plate; In all of the aluminum plate series,pure aluminum plate is the one that including most aluminum,the purity can over 99%,which is widely be use for conventional industrial.Therefore,the production process of pure aluminum plate is more simple and the price is more cheap.The material code we usually use of […]

Small batch Vacuum casting service

/in /by

What is small batch vacuum casting , vacuum casting is one of a craft in prototype machining.To put it simply, the product prototype is suspended in the air with various supports, the upper baffle around is filled with silicone, and remove the air inside the silicone then put into the vacuum mould machine to wait […]

Custom Rapid Prototyping

/in /by

Rapid Prototyping In order to verify the appearance,structure and dimensions of new product,to see if the new product’s design is perfect or not,rapid prototyping is the first step.Because we can recognize the design problem when we test the prototype.In other words,rapid prototyping can help to reduce the risk of developing mould. According to the material […]

What Material Can be Use For 3D Printing?

/in , /by

3D printing is a technology that we usually use in making prototyping.According to the different requirement of prototype,that different material with different specification is need.There is some material as below that can be use in 3D printing. 1.Polymer Material With good strength,impact resistance and heat resistance,polimer material is a most widely used of 3D printing […]

What Surface Finish Can Be Used For Aluminum Parts?

/in , /by

What Surface Finish Can Be Used For Aluminum Parts? 1.Sand blasting Sand blasting is a process that using the impact of the high-speed sand flow to clear and coarsen the metal’s surface,which can improve the  mechanical property of the parts’ surface and Fatigue resistance. 2.Polishing Polishing is a process that reducing the roughness of the parts’ surface […]

The importance of prototype

/in /by

The prototype, or product model, may also be called a product sample.Why do people need to make a prototype?Making prototype is a key link in product design process, which provides reliable material basis for guaranteeing the feasibility of product design and product preparation for trial production.The main reason that follows to introduce to make prototype. […]